A pack of 3 pieces of the i5s current clamps, specially configured to provide low current accuracy while taking measurements on secondary current transformers.
A pack of 3 pieces of the i5s current clamps, specially configured to provide low current accuracy while taking measurements on secondary current transformers.
A pack of 3 pieces of the i5s current clamps, specially configured to provide low current accuracy while taking measurements on secondary current transformers. This cost-saving 3-pack is perfect for use with 3-phase tools such as the Fluke 434 or Fluke 435.
| Nominal current range | 0.20833333333333334 | ||
| Continuous current range | 10 mA to 6 A | ||
| Maximum Non-Destructive Current | 70 A | ||
| Lowest measurable current | 10 mA | ||
| Basic accuracy | 48 Hz to 65 Hz 10 mA to 1 A 1% + 5 mA 1 A to 5 A 1% | ||
| Useable frequency | 40 Hz to 5 kHz | ||
| Output level(s) | 400 mV/A | ||
| Input Load Impedance | > 1 MΩ in parallel with up to 47 pF | ||
| Crest Factor | ≤ 3, add 0.7% to accuracy | ||
| Safety |
|
||
| CAT III 600 V per IEC/EN61010-1, Pollution Degree 2 | |||
| Maximum voltage |
|
||
| 600 V ac | |||
| Warranty |
|
||
| 1 year | |||
| Maximum conductor diameter |
|
||
| 15 mm | |||
| Output cable length |
|
||
| 2.5 m | |||
| BNC Adapter |
|
||
| Yes | |||
| BNC to banana adapter included |
|
||
| No |
Click on a category to view a selection of compatible accessories with the Fluke i5sPQ3, 5A AC Current Clamps, 3-pack.
| Nominal current range | 0.20833333333333334 | ||
| Continuous current range | 10 mA to 6 A | ||
| Maximum Non-Destructive Current | 70 A | ||
| Lowest measurable current | 10 mA | ||
| Basic accuracy | 48 Hz to 65 Hz 10 mA to 1 A 1% + 5 mA 1 A to 5 A 1% | ||
| Useable frequency | 40 Hz to 5 kHz | ||
| Output level(s) | 400 mV/A | ||
| Input Load Impedance | > 1 MΩ in parallel with up to 47 pF | ||
| Crest Factor | ≤ 3, add 0.7% to accuracy | ||
| Safety |
|
||
| CAT III 600 V per IEC/EN61010-1, Pollution Degree 2 | |||
| Maximum voltage |
|
||
| 600 V ac | |||
| Warranty |
|
||
| 1 year | |||
| Maximum conductor diameter |
|
||
| 15 mm | |||
| Output cable length |
|
||
| 2.5 m | |||
| BNC Adapter |
|
||
| Yes | |||
| BNC to banana adapter included |
|
||
| No |
Click on a category to view a selection of compatible accessories with the Fluke i5sPQ3, 5A AC Current Clamps, 3-pack.
